Home > Table of Contents Table of Contents Before You Use Your Brother Machine ....................1 Definitions of Notes ............................2 General Precautions ............................3 Trademarks and Licenses ..........................4 Open Source Licensing Remarks ........................5 Important Note ............................... 6 Set Up Your Printer ..........................
Page 3
Software Development Kit.......................... 109 Auto Media Configuration........................... 110 Auto Media Configuration Overview....................111 Use the Auto Media Configuration Function..................112 Options............................... 113 Clean Other Printer Components ..................... 114 Change the Label Peeler Options ....................117 Change the Cutting Options ......................118 Brother Numbers............................119...
Home > Before You Use Your Brother Machine Before You Use Your Brother Machine • Definitions of Notes • General Precautions • Trademarks and Licenses • Open Source Licensing Remarks • Important Note...
Home > Before You Use Your Brother Machine > Definitions of Notes Definitions of Notes We use the following symbols and conventions throughout this User's Guide: WARNING indicates a potentially hazardous situation which, if not avoided, could WARNING result in death or serious injuries.
> General Precautions General Precautions RD Rolls • Use Brother accessories and supplies (indicated by the mark). • If the label is affixed to a wet, dirty, or oily surface, it may peel off easily. Before affixing the label, clean the surface to which the label is affixed.
Before You Use Your Brother Machine > Open Source Licensing Remarks Open Source Licensing Remarks This product includes open source software. To see the Open Source Licensing Remarks, go to your model's Manuals page on the Brother support website at support.brother.com. Related Information •...
The contents of this document and the specifications of this product are subject to change without notice. • Brother reserves the right to make changes without notice in the specifications and materials contained herein and shall not be responsible for any damages (including consequential) caused by reliance on the materials presented, including but not limited to typographical and other errors relating to the publications.
Home > Set Up Your Printer Set Up Your Printer • Parts Description • Load the RD Roll • Check the Sensor Position • Connect the Power Cord • Turn Power On/Off...
Home > Set Up Your Printer > Parts Description Parts Description Front 1. Label Output Slot 2. Roll Compartment Cover 3. Tear Bar 4. Status LED 5. Roll LED (Function) Button (Feed) Button (Power) Button 9. Power LED To pause printing, press any button. Press the button again to resume printing. Printing can be paused only after each full page has been printed and cannot be paused on the final page or between pages.
Page 12
2. Serial Port 3. (TD-4420DN) LAN Port 4. USB Port Related Information • Set Up Your Printer...
Home > Set Up Your Printer > Load the RD Roll Load the RD Roll 1. Press and hold to turn off the printer. 2. Pull up the release levers on both sides of the printer to unlock the Roll Compartment Cover. 3.
Page 14
Rotate the adjuster dial toward you to lock the Roll Guides into place. 5. Insert the roll so that the label print side is facing up, as shown in the illustration. • For fanfold paper Insert the fanfold paper as shown in the illustration. a.
Page 15
7. Close the Roll Compartment Cover until it locks into place. CAUTION Be careful when closing the Roll Compartment Cover. There is a risk of injury if your finger gets pinched between the upper and lower parts of the cover. IMPORTANT •...
Home > Set Up Your Printer > Check the Sensor Position Check the Sensor Position When using RD or other types of rolls, you must check the sensor position based on the type of paper you are using. You can use other types of rolls in addition to the RD Rolls. >>...
Page 17
1. Back of media 2. Black mark 3. 0.16" (4 mm) or more Make sure there is at least 0.16" (4 mm) on the left and right of the center of the black mark. 4. Center of the black mark 5.
Page 18
Related Information • Set Up Your Printer Related Topics: • Auto Media Configuration...
Home > Set Up Your Printer > Connect the Power Cord Connect the Power Cord 1. Connect the AC Adapter to the printer. 2. Connect the AC Power Cord to the AC Adapter. 3. Plug the AC Power Cord into a grounded AC power outlet. Related Information •...
Home > Set Up Your Printer > Turn Power On/Off Turn Power On/Off • To turn on the printer, press Press to align the end of the roll. The Power LED turns green. • To turn the printer off, press and hold until the Power LED turns off.
To print from your computer, install the printer drivers, P-touch Editor, and other applications to your computer. 1. Go to install.brother and download the Software/Documentation installer. 2. Double-click the downloaded installer, and follow the on-screen instructions to proceed with the installation.
Home > Install Software > Install Printer Drivers and Software on a Computer > Available Applications Available Applications Available Applications for Windows Application Features P-touch Editor Allows you to design and print custom labels using built-in drawing tools to create various font and text styles, import images, and insert barcodes.
Home > Install Software > Connect the Printer to a Computer Connect the Printer to a Computer • Connect the Printer to a Computer Using a USB Cable • Connect the Printer to a Computer Using a Wired LAN...
Home > Install Software > Connect the Printer to a Computer > Connect the Printer to a Computer Using a USB Cable Connect the Printer to a Computer Using a USB Cable 1. Make sure the printer is turned off before connecting the USB cable. 2.
Home > Install Software > Connect the Printer to a Computer > Connect the Printer to a Computer Using a Wired LAN Connect the Printer to a Computer Using a Wired LAN Related Models: TD-4420DN To use a static IP address to connect your printer with a wired LAN connection, install the printer drivers and Printer Setting Tool, and then specify the wired LAN connection settings.
Home > Create Labels and Print Using Computer Create Labels and Print Using Computer • Create Labels Using P-touch Editor (Windows) • Print Labels Using P-touch Editor (Windows) • Create Labels and Print without Installing Software and Drivers • Print Labels Distributed to Multiple Printers to Reduce Printing Time (Windows) •...
Create Labels Using P-touch Editor (Windows) To use your printer with your computer, install P-touch Editor and the printer driver. For the latest drivers and software, go to your model's Downloads page on the Brother support website at support.brother.com. 1. Start the P-touch Editor •...
Home > Create Labels and Print Using Computer > Create Labels Using P-touch Editor (Windows) > Main Window of P-touch Editor Express Mode (Windows) Main Window of P-touch Editor Express Mode (Windows) Express mode allows you to quickly create layouts including text and images. 1.
Home > Create Labels and Print Using Computer > Create Labels Using P-touch Editor (Windows) > Main Window of P-touch Editor Professional Mode (Windows) Main Window of P-touch Editor Professional Mode (Windows) Professional mode allows you to create layouts using a wide-range of advanced tools and options. 1.
Home > Create Labels and Print Using Computer > Create Labels Using P-touch Editor (Windows) > Main Window of P-touch Editor Snap Mode (Windows) Main Window of P-touch Editor Snap Mode (Windows) Snap mode allows you to capture all or a portion of your computer screen display and print it as an image. Related Information •...
Home > Create Labels and Print Using Computer > Print Labels Using P-touch Editor (Windows) Print Labels Using P-touch Editor (Windows) >> Express Mode >> Professional Mode >> Snap Mode Express Mode Configure the settings in the Print screen before printing. •...
Home > Create Labels and Print Using Computer > Create Labels and Print without Installing Software and Drivers Create Labels and Print without Installing Software and Drivers • Print Using USB Interface (Mass Storage Mode) • Print Image Data without Using the Printer Driver...
Home > Create Labels and Print Using Computer > Create Labels and Print without Installing Software and Drivers > Print Using USB Interface (Mass Storage Mode) Print Using USB Interface (Mass Storage Mode) The mass storage feature allows you to send a file to the printer using the USB interface, without installing a printer driver.
Home > Create Labels and Print Using Computer > Create Labels and Print without Installing Software and Drivers > Print Image Data without Using the Printer Driver Print Image Data without Using the Printer Driver • The mass storage feature supports the JPEG image printing. •...
Home > Create Labels and Print Using Computer > Print Labels Distributed to Multiple Printers to Reduce Printing Time (Windows) Print Labels Distributed to Multiple Printers to Reduce Printing Time (Windows) When printing a large number of labels, printing can be distributed among multiple printers, via USB or network connection, to reduce printing time.
Page 37
(TD-4420DN) If multiple printers are connected, you can find the printer you want using its port name. The xxxxxxxxxxxx in BRNxxxxxxxxxxxx in the port name indicates the MAC address/Ethernet address of the printer. The MAC address/Ethernet address can be checked by printing the printer setup information. 5.
Home > Create Labels and Print Using Computer > Print Labels Using the Printer Driver (Windows) Print Labels Using the Printer Driver (Windows) 1. Connect the printer to a computer. 2. Open the document you want to print. 3. Select the print command in your application. 4.
You can use your printer as a stand-alone printer or connect it to a mobile device. To create and print labels directly from your mobile device, install the Brother mobile applications, and then connect your printer to your mobile device via a USB cable. The cable is sold separately.
Home > Transfer Templates to the Printer (P-touch Transfer Manager) (Windows) Transfer Templates to the Printer (P-touch Transfer Manager) (Windows) • Transfer Templates to the Printer Using P-touch Transfer Manager (Windows) • Distribute Templates to be Transferred to Users Without Using P-touch Transfer Manager (Windows)
Home > Transfer Templates to the Printer (P-touch Transfer Manager) (Windows) > Transfer Templates to the Printer Using P-touch Transfer Manager (Windows) Transfer Templates to the Printer Using P-touch Transfer Manager (Windows) • Notes on Using P-touch Transfer Manager (Windows) •...
Home > Transfer Templates to the Printer (P-touch Transfer Manager) (Windows) > Transfer Templates to the Printer Using P-touch Transfer Manager (Windows) > Notes on Using P-touch Transfer Manager (Windows) Notes on Using P-touch Transfer Manager (Windows) Because some P-touch Editor functions are not available with the printer, keep the following points in mind when using P-touch Editor to create templates.
Home > Transfer Templates to the Printer (P-touch Transfer Manager) (Windows) > Transfer Templates to the Printer Using P-touch Transfer Manager (Windows) > Transfer Templates from the Computer to the Printer (Windows) Transfer Templates from the Computer to the Printer (Windows) You can transfer templates and other data to the printer and save backups of your data on the computer.
Page 45
Transfer the Template to P-touch Transfer Manager (Windows) 1. Start the P-touch Editor • Windows 10/Windows Server 2016: Click Start > Brother P-touch > P-touch Editor 5.2, or double-click the P-touch Editor 5.2 icon on the desktop. • Windows 8/Windows 8.1/Windows Server 2012/Windows Server 2012 R2: Click the P-touch Editor 5.2 icon on the Apps screen, or double-click the P-touch Editor 5.2 icon on the...
Page 46
Home > Transfer Templates to the Printer (P-touch Transfer Manager) (Windows) > Transfer Templates to the Printer Using P-touch Transfer Manager (Windows) > Transfer Templates from the Computer to the Printer (Windows) > Main Window of P-touch Transfer Manager (Windows) Main Window of P-touch Transfer Manager (Windows) 1.
Page 47
Icon Button name Function Open Opens the selected template. Search Allows you to search for templates or other data registered to P-touch Library. Display Style Changes the file display style. Related Information • Transfer Templates from the Computer to the Printer (Windows)
Page 48
Home > Transfer Templates to the Printer (P-touch Transfer Manager) (Windows) > Transfer Templates to the Printer Using P-touch Transfer Manager (Windows) > Transfer Templates from the Computer to the Printer (Windows) > Transfer Templates or Other Data from the Computer to the Printer (Windows) Transfer Templates or Other Data from the Computer to the Printer (Windows) You can transfer templates, databases, and images from the computer to the printer.
Page 49
4. Do one of the following: • Drag the template or other data you want to transfer and place it in the new folder. • To transfer multiple templates or other data, drag the files you want to transfer, and then place them in the new folder.
Page 50
Data type Maximum number of Restriction details transferable items • Wide images may be cropped. • You can confirm the available space in the transfer file memory by printing the Printer Setting Report. See Available memory in the report for the available space. The available space appearing in Available memory: ****B may be different from the actual available space.
Page 51
A confirmation message appears. • You can also transfer individual items to the printer without adding them to a folder. Select the template or other data you want to transfer, and then click Transfer. • Multiple items and folders can be selected and transferred in one operation. 8.
Home > Transfer Templates to the Printer (P-touch Transfer Manager) (Windows) > Transfer Templates to the Printer Using P-touch Transfer Manager (Windows) > Backup Templates or Other Data Saved in the Printer (Windows) Backup Templates or Other Data Saved in the Printer (Windows) You can retrieve templates or other data saved in the printer and save it on the computer.
Home > Transfer Templates to the Printer (P-touch Transfer Manager) (Windows) > Transfer Templates to the Printer Using P-touch Transfer Manager (Windows) > Delete Printer Data (Windows) Delete Printer Data (Windows) You can delete all templates or other data saved on the printer. 1.
Home > Transfer Templates to the Printer (P-touch Transfer Manager) (Windows) > Transfer Templates to the Printer Using P-touch Transfer Manager (Windows) > Create Transfer Files and Transfer Package Files (Windows) Create Transfer Files and Transfer Package Files (Windows) Use P-touch Transfer Manager to save template data created using P-touch Editor in the BLF or PDZ format, and transfer these files in this format to a printer over a network, from a computer or mobile device.
Page 55
NOTE The Save Transfer File button appears when the printer is disconnected from the computer or offline. • If you click the Save Transfer File button after selecting Configurations, all templates in the folder are saved as the Transfer file (BLF) or Transfer Package file (PDZ). •...
P-touch Transfer Express. You can then use P-touch Transfer Express to transfer the template directly to your printer. To download the latest version of P-touch Transfer Express, go to your model's Downloads page on the Brother support website at support.brother.com.
Page 57
• Windows 7/Windows Server 2008/Windows Server 2008 R2: Click Start > All Programs > Brother P-touch > P-touch Editor 5.2, or double-click the P-touch Editor 5.2 icon on the desktop. P-touch Editor starts. 2. Open the template you want.
Page 58
The template is saved as a Transfer Package file (PDZ). Distribute the Transfer Package File (PDZ) and P-touch Transfer Express to Others If you already have downloaded P-touch Transfer Express, it is not necessary for the administrator to send the Transfer Express folder. In this case, you can simply move the distributed Transfer Package file to the downloaded folder, and then double-click PtTrExp.exe.
Page 59
Do not turn off the power when transferring templates. 1. Turn on the printer. 2. Connect the printer to the computer using a USB cable. 3. Double-click the PtTrExp.exe file received from the administrator. 4. Do one of the following: •...
Home > Store or Manage Templates (P-touch Library) Store or Manage Templates (P-touch Library) • Edit Templates Using P-touch Library (Windows) • Print Templates Using P-touch Library (Windows) • Search Templates Using P-touch Library (Windows)
Click the P-touch Library 2.3 icon on the Apps screen. • Windows 7/Windows Server 2008/Windows Server 2008 R2: Click Start > All Programs > Brother P-touch > P-touch Tools > P-touch Library 2.3. The main window appears. Overview of the Toolbar Icons...
Click the P-touch Library 2.3 icon on the Apps screen. • Windows 7/Windows Server 2008/Windows Server 2008 R2: Click Start > All Programs > Brother P-touch > P-touch Tools > P-touch Library 2.3. The main window appears. 2. Select the template you want to print, and then click Print.
Click the P-touch Library 2.3 icon on the Apps screen. • Windows 7/Windows Server 2008/Windows Server 2008 R2: Click Start > All Programs > Brother P-touch > P-touch Tools > P-touch Library 2.3. The main window appears. 2. Click Search.
Page 64
The following search criteria are available: Settings Details Multiple Parameters Determines how the program searches when multiple criteria are specified. If you select AND, the program searches for files meeting all of the criteria. If you select OR, the program searches for files meeting any of the criteria.
Home > Network Network Related Models: TD-4420DN • Learn about Network Management Software and Utilities • Change Printer Settings Using Web Based Management...
IP address into your web browser to access and change your print server settings. BRAdmin Light (Windows) BRAdmin Light is a utility for the initial setup of network-connected Brother printers. This utility can search for Brother printers on your network, view their status and configure the basic network settings, such as IP address.
Software icon on the desktop. • Windows 7/Windows Server 2008/Windows Server 2008 R2: Click Start > All Programs > Brother P-touch > P-touch Update Software, or double-click the P-touch Update Software icon on the desktop. 2. Click the Computer software update icon.
Software icon on the desktop. • Windows 7/Windows Server 2008/Windows Server 2008 R2: Click Start > All Programs > Brother P-touch > P-touch Update Software, or double-click the P-touch Update Software icon on the desktop. 3. Click the Machine update icon.
Page 71
NOTE Do not turn off the printer or disconnect the cable during data transfer. 6. Check the content to be updated, and then click Start to begin the update. The firmware update begins. NOTE Do not turn off the printer or disconnect the cable during the update process. Related Information •...
Click the Printer Setting Tool icon on the Apps screen. • Windows 7/Windows Server 2008/Windows Server 2008 R2: Click Start > All Programs > Brother > Label & Mobile Printer > Printer Setting Tool. The main window appears. 1. Printer Lists the connected printers.
Page 74
5. Paper Size Setup Add media information and settings to the printer driver to use sizes not listed in the Paper Size list of the printer driver. NOTE To open Paper Size Setup, you must be logged on with administrator rights. 6.
Home > Printer Settings > Change Printer Settings Using the Printer Setting Tool (Windows) > Communication Settings of the Printer Setting Tool (Windows) Communication Settings of the Printer Setting Tool (Windows) Related Models: TD-4420DN Use Communication Settings in the Printer Setting Tool to specify or change the printer communication information, when connecting the printer and computer with a USB cable.
Page 76
Clicking Apply applies all settings in all tabs to the printer. If the Disable these settings check box is selected, the settings are not applied. 7. Items When the Current Status menu is selected, the current settings appear in the settings display/change area. Select the item for the settings you want to change.
Page 77
Saves the current settings in a file. If the Disable these settings check box is selected, the settings are not saved. Exported files are not encrypted. Tools Menu Options • Option Settings Automatically restart the printer after applying new settings If this check box is selected, the printer automatically restarts after communication settings are applied.
Page 78
• Enable this address Enables the specified static IPv6 address. • Primary DNS Server IPv6 Address/Secondary DNS Server IPv6 Address Specifies the DNS server IPv6 addresses. • IPv6 Address List Displays the list of IPv6 addresses. Wired 802.1x Authentication Configures IEEE 802.1x authentication. •...
Home > Printer Settings > Change Printer Settings Using the Printer Setting Tool (Windows) > Device Settings of the Printer Setting Tool (Windows) Device Settings of the Printer Setting Tool (Windows) Use Device Settings in the Printer Setting Tool to specify or change printer settings when connecting the printer and computer with a USB cable.
Page 80
5. Exit Exits the Device Settings window and returns to the main window of the Printer Setting Tool. 6. Apply Applies the settings to the printer. To save the specified settings in a command file, select the Save in Command File command from the drop-down list. The saved command file can be used with the mass storage mode to apply the settings to a printer.
Page 81
Resets the settings that can be changed in the Device Settings to factory settings. • Delete Template and Database Deletes the templates and databases stored in the printer. • Delete Print Log Deletes the print log stored in the printer. •...
Page 82
• Align Paper Leading Edge when the Cover is Closed Selects whether the paper is automatically fed when the cover is closed. • Exit Position Selects the media output location. • Auto Cut Sets the cutting method when printing multiple labels. •...
Page 83
Adjusts the amount of light emitted by the reflective/black mark sensor. • Media Sensor (Peeler) Specifies the settings when the Label Peeler (optional) is used. Detection Sensitivity Adjusts the precision of the sensor that detects whether the label has been peeled. Management Tab To display this tab, you must have administrator privileges for the computer or the printer.
• For more information on P-touch Template Settings, see the P-touch Template Manual/ Command Reference (English only). You can download the latest version from the Brother support website at support.brother.com/manuals. 1. Default Command Mode Specifies the P-touch Template mode as the default mode.
Page 85
23h 24h 40h 5Bh 5Ch 5Dh 5Eh 60h 7Bh 7Ch 7Dh 7Eh To change the characters, see the P-touch Template Manual/ Command Reference (English only). You can download the latest version from the Brother support website at support.brother.com/manuals. 7. Command Prefix Character Specifies the prefix character code identifying commands used in P-touch Template mode.
Home > Printer Settings > Change Printer Settings Using the Printer Setting Tool (Windows) > Paper Size Setup of Printer Setting Tool (Windows) Paper Size Setup of Printer Setting Tool (Windows) Use the Paper Size Setup in the Printer Setting Tool to add paper sizes not available in the Paper Size list of the printer driver.
Page 87
6. Export Exports the paper formats in the Currently Registered Paper Sizes list to a file. The exported formats can then be distributed to other computers. 7. Exit Exits the Paper Size Setup window and returns to the main window of the Printer Setting Tool. 8.
Page 88
4. Detailed settings Specify details for the paper format to be added. 5. Advanced Printing Adjustments Click this button to display the Advanced Printing Adjustments dialog box and make advanced printing adjustments for each paper format. 6. Cancel Cancels the settings and closes the dialog box. The settings will remain unchanged. 7.
Page 89
The settings for Media Sensor (Transmissive/Gap) in the Device Settings dialog box can influence the detection and calibration results. Make sure you specify the appropriate values. Example settings: Setting EX1 Setting EX2 Device Settings Paper Size Setup Actual effect 5. Media Sensor (Reflective/Bar) Adjust the precision with which the reflective/black mark sensor detects black marks and the amount of light emitted by the sensor.
Page 90
Home > Printer Settings > Change Printer Settings Using the Printer Setting Tool (Windows) > Paper Size Setup of Printer Setting Tool (Windows) > Distribute Paper Formats to Other Computers (Windows) Distribute Paper Formats to Other Computers (Windows) The paper formats exported from the Currently Registered Paper Sizes list in the Paper Size Setup dialog box can be distributed to other computers.
Home > Printer Settings > Apply Setting Changes to Multiple Printers (Windows) Apply Setting Changes to Multiple Printers (Windows) >> Communication Settings (TD-4420DN) >> Device Settings Communication Settings (TD-4420DN) 1. After applying settings to the first printer, disconnect the printer from the computer, and then connect the second printer to the computer.
Home > Printer Settings > Change Printer Settings Using Web Based Management Change Printer Settings Using Web Based Management Related Models: TD-4420DN You can use a standard web browser to change your print server settings using the Hyper Text Transfer Protocol (HTTP) or Hyper Text Transfer Protocol over Secure Socket Layer (HTTPS).
Home > Printer Settings > Change Printer Settings Using Web Based Management > Set or Change a Login Password for Web Based Management Set or Change a Login Password for Web Based Management Related Models: TD-4420DN We recommend changing the default login password to prevent unauthorized access to Web Based Management.
Home > Printer Settings > Confirm Printer Settings Confirm Printer Settings You can print a Printer Settings Report without connecting the printer to a computer or mobile device. 1. Turn on the printer. 2. Load a 4" (102 mm) or wider RD Roll into the printer. 3.
Home > Routine Maintenance > Clean Your Printer Clean Your Printer We recommend cleaning your printer on a regular basis to maintain its correct performance. Always disconnect the printer from any power source before cleaning. >> Clean the Exterior of the Unit >>...
Page 97
Clean the Roller • Wipe the roller with a lint-free cloth dipped in isopropyl alcohol or ethanol. After cleaning the roller, make sure that no lint or other material remains on the roller. Use isopropyl alcohol or ethanol according to the manufacturer's safety guidelines, as applicable. Clean the Print Head •...
Home > Troubleshooting Troubleshooting • If You Are Having Difficulty with Your Machine • Error and Maintenance Indications • Printing Problems • Version Information • Reset the Printer...
Insert the RD Roll correctly. For more information, see Related Information. If you still have problems, see Related Information. If, after reading the topics, you are unable to resolve the problem, visit the Brother support website at support.brother.com. Related Information •...
Home > Troubleshooting > Error and Maintenance Indications Error and Maintenance Indications The indicators light and flash to indicate the printer's status. Indicator is lit in the color shown. Indicator is flashing in the color shown. Indicator can be off, lit, or flashing in any color. Indicator is off.
Page 101
Press and hold to clear Cutter error the error. (Twice for 2 seconds) Print head undetected error The printer is in Boot Contact Brother Customer mode. Service. Resetting mode is on (Once for 2 (Once for 2 (Once for 2 seconds)
• Is the adapter cord connected correctly? Check the cord is connected correctly. • If the LED indicator still does not light up, contact Brother Customer Service. The printer does not print, or a • Is the cable loose? printing error is received.
Page 103
Problem Solution An error occurs when the roll If a feed error occurs, use the Paper Size Setup of the Printer Setting Tool to cannot be fed to the beginning of assign the correct paper settings to the printer. the printing. Printer is in cooling mode.
Page 104
Problem Solution When printing via the USB cable, • Is the printer set for sequential printing? If so, set print mode to buffered the printer repeatedly pauses, and printing. then continues printing. Windows 10/Windows Server 2016: Click Start > Settings > Devices > Printers & scanners. Click the printer you want to set up, and then click Open queue.
Page 105
Problem Solution Barcodes printed using If the barcode data was created using a landscape orientation, change the applications other than P-touch Orientation setting in the Basic tab of the printer driver to Landscape and try Editor cannot be read. again. Printed Image Problems Problem Solution...
Page 106
To allow access, see your security software instructions or contact the installation, or when printing. manufacturer. Incorrect port numbers are being The following port numbers are used for Brother network features: used for the Brother network • BRAdmin Light: Port number 161 / Protocol UDP features.
Home > Troubleshooting > Version Information Version Information Problem Solution I do not know the version number You can confirm the version number of the firmware by printing the Printer of the firmware for the printer. Settings Report. For more information, see Related Information. I want to confirm whether I am Use the P-touch Update Software to confirm whether you have the latest version.
Home > Troubleshooting > Reset the Printer Reset the Printer Reset the internal memory of your printer to clear all the saved label files, or if the printer is not operating correctly. >> Reset All Settings to the Factory Settings Using the Printer Buttons >>...
Print Speed (depending on the media used) • Maximum 8 ips (203.2 mm/s) Maximum Print Width • 4.09" (104.1 mm) Maximum Print Length 118.11" (3000 mm) Under Brother standard environment Size Weight • TD-4410D Approximately 4.58 lb (2.08 kg) •...
Page 111
In order to achieve optimum print results, we recommend using Brother thermal paper (RD Rolls). Media Type Wristbands, Continuous, Die-Cut, Fan Fold, Perforated, Tag Media Width From 0.75" to 4.65" (19 mm to 118 mm) Minimum Media Length 0.25" (6.4 mm) Continuous: 0.25"...
Appendix > Software Development Kit Software Development Kit A Software Development Kit (SDK) is available from the Brother Developer Center (brother.com/product/dev). ™ (TD-4420DN) The b-PAC SDK and the SDKs for mobile devices (Android , iPhone, and iPad) can also be downloaded.
Home > Appendix > Auto Media Configuration Auto Media Configuration • Auto Media Configuration Overview • Use the Auto Media Configuration Function • Check the Sensor Position...
Home > Appendix > Auto Media Configuration > Auto Media Configuration Overview Auto Media Configuration Overview Auto Media Configuration allows the printer to automatically detect the characteristics of the installed paper, and then select the correct paper size settings. Model Automatic Detection Items TD-4410D •...
Click the Printer Setting Tool icon on the Apps screen. • Windows 7/Windows Server 2008/Windows Server 2008 R2: Click Start > All Programs > Brother > Label & Mobile Printer > Printer Setting Tool. 3. Click Paper Size Setup. 4. Click Edit or New.
Home > Appendix > Options > Clean Other Printer Components Clean Other Printer Components We recommend cleaning the printer on a regular basis to maintain optimal performance. Always disconnect the printer from any power source before cleaning. >> Roller >> Print Head >>...
Page 118
NOTE • Always remove the ejected labels from the Label Output Slot. If the slot becomes blocked, label jams may occur. • Cutting accuracy cannot be guaranteed for labels with perforations or creases. • If adhesive residue gets attached to the Label Output Slot, it may cause label jams. Clean the Label Output Slot with a dry cotton swab.
Home > Appendix > Options > Change the Label Peeler Options Change the Label Peeler Options After attaching the Label Peeler, set the printer driver peeler option. 1. Do one of the following: • Windows 10/Windows Server 2016: Click Start > Settings > Devices > Printers & scanners. Click the printer you want to set up, and then click Open queue.
Home > Appendix > Options > Change the Cutting Options Change the Cutting Options The cutting options allow you to specify how labels are fed and cut. If you do not use P-touch Editor, you can change the cutting options in the printer driver properties. 1.
For the location of a Brother authorized service center, visit www.brother.ca/support. Ordering Accessories and Supplies For best quality results use only genuine Brother supplies, which are available at most Brother retailers. If you cannot find the supplies you need and have a Visa, MasterCard, Discover, American Express credit card, or PayPal account, you can order directly from Brother.
Page 123
In Canada: www.brother.ca Related Information • Appendix...
Page 124
Brother International Corporation 200 Crossing Boulevard P.O. Box 6911 Bridgewater, NJ 08807-0911 USA Brother International Corporation (Canada) Ltd. 1 rue Hôtel de Ville, Dollard-des-Ormeaux, QC, Canada H9B 3H6 Visit us on the World Wide Web www.brother.com USA/CAN Version 0...