10 ]Attaching The Roll Cover Outer B, Roll Cover Clear, And Roll Cover Front - Brother TD-2020 Service Manual

[ 10 ]Attaching the Roll Cover Outer B, Roll Cover Clear, and Roll Cover Front

(1) Set the button A, button B, status button, and two LED lenses to the roll cover
outer B.
(2) Set the panel PCB ASSY to the roll cover outer B and secure it with the hook.
(3) Secure the panel PCB ASSY and the FG harness ASSY to the roll cover outer B
with two taptite bind B M2.6X8 screws.
NOTE: When tightening the screw, put the end of FG harness to the hook.
FG harness ASSY
FG harness ASSY
Button B
Hook
Figure 3.5-12
Taptite bind B M2.6X8
Roll cover outer B
III - 37
Panel PCB ASSY
Button A
Status button
LED lenses