Brother TD-2020 Service Manual page 37

(3) Remove the adjuster rack L and the adjuster rack R from the upper cover.
(4) Secure the roller guide roller firmly, and remove the taptite cup B M2.6X6 screw,
and remove the roller guide roller from the adjuster rack R. Remove the two
taptite cup B M2.6X6 screws, and remove the adjuster lock and adjuster lock
spring from the adjuster rack R while pulling the adjuster lock upward.
(5) Remove the film spring from the adjuster rack L. Secure the roller guide roller
firmly, and remove the taptite cup B M2.6X6 screw, and remove the roller guide
roller from the adjuster rack L.
(6) Remove the film spring 2 from the upper cover.
Taptite cup B M2.6X6
Adjuster rack L
Film spring
Film spring 2
Roller guide rollers
Taptite cup B M2.6X6
Figure 3.4-21
III - 23
Adjuster rack R
Adjuster
lock spring
Taptite cup B
M2.6X6
Adjuster lock
Upper cover