16 ]Attaching The Bottom Cover A, Front Cover, And Bottom Cover B - Brother TD-2020 Service Manual

[ 16 ]Attaching the Bottom Cover A, Front Cover, and Bottom Cover B

(1) Attach the four lower foots to the bottom cover A.
(2) Lift the release lever to open the roll cover ASSY.
(3) Insert the guide shaft into the machine.
(4) Set the bottom cover A to the machine by pushing it outward.
NOTE: Be careful not to catch the harness.
Roll cover ASSY
Release lever
Guide shaft
Bottom cover A
Lower foots
Lower foots
Figure 3.5-23
III - 48