7 ] Attaching The Sensor Cover C, T Sensor Pcb Assy, And Sensor Holder B - Brother TD-2020 Service Manual

[ 7 ] Attaching the Sensor Cover C, T Sensor PCB ASSY, and Sensor Holder B

(1) Attach the sensor cover C to the sensor holder B.
(2) Attach the T sensor PCB ASSY to the sensor holder B using two double face
tapes TD2000.
(3) Insert the T sensor PCB ASSY harness into the hole on the roll cover inner. Set
the sensor holder B to the roll cover inner, and secure it with the two taptite bind
B M2.6X8 screws.
Sensor holder B
T sensor PCB ASSY
Roll cover inner
Double face tapes
TD2000
Taptite bind B M2.6X8
Figure 3.5-9
III - 34
Sensor cover C
T sensor
PCB ASSY
Hole