19Check Peel Sensor (Paper On) - Brother TD-2020 Service Manual

1.2.19 Check Peel Sensor (Paper on)
Checks that the machine can detect the A/D value of the connected optional peeler when any
paper is set. Use the label for RDU F59X102 1 ASSY.
Model
TD-2000
TD-2100N
(1) Place the label (peeled from the paper) so that it covers the top of the peel sensor.
(2) Make sure that the "Check peel sensor (Paper on)" field is highlighted in yellow and press
the [Run] button to start the inspection.
(3) When the machine acquires the A/D value of the connected optional peeler and the value
is met to the OK condition, the inspection finishes automatically.
Note : The cover of the machine must be closed. If it is open at the time of the inspection, close
it first.
Note : If any item is not "OK", press the [NG] button to finish the inspection.
 OK condition
Optional peeler A/D value (paper on) is 107 to 255.
 Inspection errors
• A/D value is NG.
It appears when the A/D value is not within the OK condition. Check that the sensor is
covered by the label.
Inspection
Invalid
Valid
Figure 42. "Check peel sensor (Paper on)" start-up
Figure 43. "Check peel sensor (Paper on)" NG
1 - 27