17 ]Disassembling The Mecha Assy - Brother TD-2020 Service Manual

[ 17 ]Disassembling the Mecha ASSY

(1) Release the hook to remove the double gear C and double gear B from the main
chassis ASSY.
(2) Remove the platen gear from the platen roller.
(3) Remove the retaining ring E2.5 to remove the double gear A from the main
chassis ASSY.
(4) Remove the two screw bind M3X4 screws to remove the tape feed motor ASSY
from the main chassis ASSY.
Tape feed motor ASSY
Main chassis ASSY
Figure 3.4-22
III - 24
Platen roller
Platen gear
Double gear A
Double gear B
Retaining ring E2.5
Screw bind M3X4
Double gear C
Hook