Output Buffer Data - Brother TD-2020 Service Manual

1.3.3 Output Buffer Data

Outputs data required for the machine analysis as a binary file (*.bin). It can be used when the
investigation of the causes for the BIL is needed. Follow the instructions given by serviceman to
use this tool properly.
(1) Check that the machine is turned ON and connected to the PC with USB cable.
(2) Make sure that the inspection item on the main screen is highlighted in yellow and press
the [Run] button.
(3) The message below appears when the machine is receiving the data.
(4) Once the receiving is completed, it requests the binary file name to output. As a default,
the name is in "TD2000_YYYYMMDD_hhmmss.bin" format (YYYYMMDD: date,
hhmmss: time) but it is allowed to change this file name. Once the file name is entered,
press the [Save] button. File output starts.
(5) Once the file output is completed, the message below appears in the "Results" field.
Figure 65. "Output buffer data" start-up
Figure 66. Receiving buffer data
Figure 67. "Buffer data directory" selection window
Figure 68. "Output buffer data" OK
1 - 38