Main Function - ACME LED-PAR 100 WW/CW User Manual

○
5 Mains input/output:：Use Powercon true one mains connection.
DMX input/output:
○
6
For DMX512 link, use 5-pin XLR plug cable to input DMX signal, and to link the next unit.
The beam angle can be adjusted manually, which is 9°/15°/20°/25°/30°.

4.2 Main Function

To select any functions, press MENU button until the required one is shown on the display. Select the
function by ENTER button. Use DOWN and UP button to change the mode. Once the required mode has
been selected, press ENTER button to setup or it will return to the main functions without any change
after idling 8 seconds automatically. Back to the functions without any change press MENU button. The
main functions are shown below:
7A