Table of Contents
Advertisement
Display Inverse
Select the
, press the ENTER button. Use the DOWN and UP button to select
(Display
Normal) or
(Display Inverse). Once selected, press the ENTER button to setup or exit menu
mode without any change after 8 seconds automatically. Back to the functions without any change press
the MENU button again.
Manual mode
Select the
, press the ENTER button. Use the DOWN and UP button to select
the
brightness (d000-d100)or
strobe(S000-S100). Once selected, press the ENTER button to
setup or exit menu mode without any change after 8 seconds automatically. Back to the functions
without any change press the MENU button again.
Auto Test
Select the
, press the ENTER button and the unit will run self-test by built-in program. To go back
to the functions press the MENU button again. Hold and press the MENU button about one second or
wait for one minute to exit the menu mode.
Temperature Display
Select the
, press ENTER button and the display will show the temperature，To go back to the
functions press the MENU button.
Fixture Hour
Select the
, press ENTER button and the display will show the number of working hours of the
unit. To go back to the functions press the MENU button.
10A
Hide quick links:
Advertisement
Table of Contents
