Table of Contents
Advertisement
Installation Instructions
When choosing a location to set up your new balance, observe the
following conditions to optimize ease and speed of use:
• Set up the balance on a stable, rigid and level surface.
• Avoid locations subject to extremes in heat or direct exposure
to sunlight.
• Room temperatures above 86°F (30°C) or below 50°F (10°C)
could affect balance operation and accuracy.
• Protect the balance from direct exposure to drafts.
• Protect the balance from aggressive chemical vapors.
• Avoid strong magnetic fields present from other devices.
• Avoid locations subject to vibration.
• Avoid exposing the balance to excessive moisture for extend-
ed periods.
• For best results, allow the balance to adjust to room tempera-
ture before connecting to power source, for at least two
hours.
• Line voltage to the balance should be reasonably constant
and free from fluctuations.
Pan Assembly
Please observe the following precautions when handling the
weighing pans:
• Do not apply manual pressure to the weighing pan at
any time.
• Do not bump the pan.
• Do not drop objects onto the pan.
• Do not attempt to clean or vigorously wipe the pan while it is
installed on the balance.
• When removing the pan, pull the pan straight up (pulling the
pan at an angle could result in mechanical breakage).
To avoid damage to your precision balance during shipping, the
pan assembly components were packed separately.
2
Hide quick links:
Advertisement
Table of Contents
