Check Weighing - Denver Instrument P-114 Operation Manual

Check Weighing Mode
This application allows you to obtain plain-language limit respons-
es to your weight based off of limits which are defined by the user.
Pressing the TARE key will exit from any menu without sav-
Note: ing changes.
Memo:
Applications
Units
Environment
GLP/ISO
Print
Language
System
Standby
Setting target high and low limits:
Use this feature to receive an "OK" when the reading is within user
defined limits. "HIGH" or "LOW" message are displayed when the
reading is outside of these limits.
1. Press MENU.
2. When "Applications" is highlighted, press the
3. Press the until "Check Weigh" is highlighted and then
press .
4. Press the or
played, press .
5. Enter the weight where outside of this the value you receive a
"High" (or "Low") target message.
a. Using the move the cursor to the correct digit, in relation-
ship to the decimal place to be changed.
b. Press or
c. Press to move to the next digit.
d. Repeat these steps until the limit is displayed.
e. Press ENTER.
6. Using the same procedure, set the other limit.
7. Press until "Enable" is highlighted.
8. Press the ENTER key to accept and return to the measurement
screen.
9. Taring will change the weight to zero.
Normal Mode
Count Mode
Check Weigh
Animal Mode
Target Weigh
Statistics
Formulation
Check Weighing Screen
key until "High Limit" (or "Low Limit") is dis-
until the desired unit is selected.
16
.