Restoring Factory Defaults - Denver Instrument P-114 Operation Manual

Pressing any key returns the balance to weighing mode. If "Off" is
selected in the standby setup menu, the balance will never go into
standby mode.
To set standby time:
1. Press MENU.
2. Press until "Standby" is highlighted, press the
3. Press or until the desired time (in seconds) is displayed.
4. Press ENTER to save standby time and return to the measurment
screen.
Restore Factory Defaults
To restore all settings to the factory defaults:
1. Press MENU.
2. Press until "System" is highlighted, press the
3. Press the until "Defaults" is highlighted, press the
4. When "Factory" is highlighted, press ENTER.
WARNING!
Setting factory defaults will reset all settings.
List of Factory Defaults
Count Mode
Check Weighing
Animal Weighing
Target Weighing
GLP/ISO Print
Statistics
Formulation
Primary Units
Secondary Units
Print Condition
Print Format
Environmental Filter
Environmental Stability
Auto Zero
Security
RS232 Baud
RS232 Serial
RS232 Echo
Speaker
Standby
!
Off
Off
Off
Off
All On
Off
Off
Grams
Milligrams or Kilograms
On request, after stability
Type 1
Normal
Normal
On
All Off
9600
8, None, 1
Off
On
Off
33
key.
.
.