Cleaning And Maintenance - Denver Instrument P-114 Operation Manual

Cleaning and Maintenance

Repairs
Repair work must be performed by qualified factory-trained
personnel only.
This unit contains no user serviceable parts.
All replacement parts should be obtained from the
manufacturer. Please refer to the inside front cover of
this manual for the phone number of your sales and
Never lift balance by the weighing pan as this may cause
damage to internal mechanisms.
Always lift and transport the balance by its base.
Cleaning
Caution! Disconnect the balance AC adapter from power source prior to
cleaning. Make sure that no liquids enter the balance housing. Do not use
aggressive cleaning agents such as cleansers. A mild detergent is recom-
mended. Disassemble the Pan Assembly and clean the floor pan, breeze
ring, pan support and cover pan separately, then reassemble. Clean the bal-
ance with a piece of cloth. After cleaning, wipe the balance down with a dry,
soft cloth. Recalibration of the balance is recommended after cleaning.
If there are any indications that safe operation of the balance is
no longer warranted, turn off power and disconnect
from AC power source immediately.
Safety Inspection
Safe operation of the balance is no longer assured if there is visible damage
to the AC adapter or cord, the AC adapter no longer functions properly or
the AC adapter has been stored for a long period under unfavorable condi-
tions.
Note
service representative.
!
Warning!
!
Warning!
36