To Set Display; Standby - Denver Instrument P-114 Operation Manual

Internal Calibration (PI-Series only)
When "Internal Calibration" is set "Off" it will not allow internal
calibration, only external calibration, when the calibration key is
pressed. When "Internal Calibration" is set "On" it will perform
internal calibration when the calibration key is pressed or external
calibration when a weight is placed on the pan and the calibration
key is pressed.
1. Press MENU.
2. Press until "System" is highlighted, press the
3. Press or until "Internal Cal" is highlighted, then press the
key.
4. Press or until the desired setting is highlighted (On or Off)
and press ENTER.
5. Press TARE to return to the measurement screen, or
to the main menu.
Display
To set the contrast:
1. Press MENU.
2. Press until "System" is highlighted, press the
3. Press or until "Display" is highlighted, then press the
key.
4. Press until "Contrast" is highlighted, press the
5. When "Adjust" is highlighted, press
contrast setting is displayed and press ENTER.
6. Press TARE to return to the measurement screen, or
to the main menu.
To set the backlight level:
1. Press MENU.
2. Press until "System" is highlighted, then press the
3. Press or until "Display" is highlighted, then press the
key.
4. Press until "Backlight" is highlighted, then press the
key.
5. When "Adjust" is highlighted, press
backlight level is displayed and press ENTER.
6. Press TARE to return to the measurement screen, or
to the main menu.

Standby

The Pinnacle Series has a standby mode to conserve energy. If no
measurements are made during the length of the standby time, as
defined by the user, the backlight will turn off and the display will
show a clock.
or until the desired
or until the desired
32
key.
to return
key.
key.
to return
key.
to return