Primary
Secondary
Toggling between Primary and Secondary Unit
Press ENTER to exchange the primary and secondary units while on
the measurement screen.
Calibration
Your balance was calibrated at the factory; however, it is necessary to
re-calibrate upon setup and on a regular basis thereafter. The factory
recommendation for calibration is once per week using a permissible
weight standard. Reasons for more frequent calibration include:
• Moving the balance
• Significant temperature changes
• Removing the balance from AC power
• Procedures to meet ISO/GLP procedures
Grams
Kilograms
Milligrams
Ounces
Troy ounces
Pounds
Grains
more
10