Setting The Stability Icon; Auto Zero - Denver Instrument P-114 Operation Manual

Setting the stability icon:

Many laboratories rely on the stability icon to be displayed before a
measurement is recorded. This balance can be adjusted to deter-
mine how much the weight can change before the stability icon
disappears. A very coarse setting means there must be significant
change for the stability icon to change to unstable, while a fine set-
ting removes the stability icon with very little change.
1. Press the MENU.
2. Press the until "Environment" is highlighted, press the
3. Press the until "Stability" is highlighted, press the
4. Press the or
the stability icon to disappear is highlighted (Fine, Normal,
Coarse or Very Coarse) and press ENTER.
5. Press the TARE key to return to the measurement screen, or
return to the main menu..

Auto Zero:

When auto zero is on, any slight changes in the tared weight will
be kept at 0.0.
1. Press MENU.
2. Press the until "Environmental" is highlighted, press the
3. Press the until "Auto zero" is highlighted, press the
4. Press the or
selected (On or Off) and press ENTER.
5. Press TARE to return to the measurement screen, or
to the main menu..
arrow until the desired amount of change for
arrow until the desired auto zero setting is
29
.
.
to
.
.
to return