Setting Sample Id; Setting Sample Number - Denver Instrument P-114 Operation Manual

Setting the Sample ID:
The Sample ID can be up to 9 alphanumeric characters. This is
ideal for batch weighing.
1. Press MENU.
2. Press until "GLP/ISO" is highlighted, press the
3. Press the until "Sample ID" is highlighted, press the
4. Enter the sample ID.
a. Press or
b. Press to move to the next character.
c. Repeat these steps until the desired ID is displayed.
d. Press ENTER.
5. Press the TARE key to return to the measurement screen or
return to the main menu.
Setting the Sample Number:
The Sample Number can be started at any point from 0 to
999999999. This number can be printed along with each data point
and is automatically increased by one each time the print key is
pressed.
1. Press MENU.
2. Press until "GLP/ISO" is highlighted, press the
3. Press the until "Number" is highlighted, press the
4. Enter the starting sample number.
a. Press or
b. Press to move to the next digit.
c. Repeat these steps until the starting sample number (up to
999999999) is displayed.
d. Press ENTER.
5. Press the TARE key to return to the measurement screen or
return to the main menu.
Printing ISO/GLP Header
If selected "On", a header will be printed which includes: User ID,
Time, Date, Sample ID, and Sample Number with each data point.
1. Press MENU.
2. Press until "GLP/ISO" is highlighted, press the
3. Press the until "Header" is highlighted, press the
4. Press or until the desired setting is selected and press
ENTER.
5. Press the TARE key or
to return to the main menu.
until the desired character is selected.
until the desired digit is selected.
to return to the measurment screen, or
24
.
.
to
.
.
to
.
.