Counting Mode - Denver Instrument P-114 Operation Manual

Counting Mode

In counting mode, you can determine the number of parts, each
having approximately the same weight. A reference weight is
determined for the reference quantity and the balance weighs and
counts similar pieces.
The balance will display both the piece count and the combined
weight in units set as the primary units.
Pressing the TARE key will exit from any menu without sav-
ing changes.
Note:
Memo:
The total sample weight must not exceed the balance
capacity.
Note:
Memo:
The weight of each piece must be greater than the resolu-
Note: tion of the balance.
Memo:
Entering count mode:
1. Press MENU.
2. When "Applications" is highlighted, press the
3. Press until "Count Mode" is highlighted, then press the
4. Using the and
10, 20, 50 or 100 or custom).
5. Press the ENTER key to accept and begin count mode.
Normal Mode
Count Mode
Check Weigh
Animal Mode
Target Weigh
Statistics
Formulation
selected the desired reference quantity (5,
5
10
20
50
100
Custom
12
.
.