Formulation - Denver Instrument P-114 Operation Manual

To quit Check weighing, select "Normal Mode" in applica-
Note:
tion menu.
Memo:

Formulation

This feature allows you to weigh out several different components
in one container. The weight of the individual component will be
shown as well as the total weight.
Pressing the TARE key will begin a new formulation without
storing current weight.
Note:
Memo:
The total weight on the pan may not exceed the maximum
capacity of the balance.
Note:
Memo:
Entering formulation mode:
1. Press MENU.
2. When "Applications" is highlighted, press the
3. Press until "Formulation" is highlighted, then press ENTER.
Beginning a formulation:
1. "Formulation" should be displayed on the screen. If not, follow
steps in "entering formulation mode".
2. Place the container on the pan.
3. Press the TARE key.
4. Place the first component in the container and press ENTER.
This measurement is now stored.
5. Add the second component. The weight of this component is
displayed as the primary measurement and the cumulative
weight as the secondary measurement.
6. Repeat above step for all components.
At any time, toggle of component and total weight is possi-
ble with the
Note:
Memo:
To start a new formulation:
1. Remove all items from the pan.
2. Place container on the pan.
3. Press the TARE key.
4. Follow steps 4-6 in "Beginning a formulation".
or keys.
17
key.