Denver Instrument P-114 Operation Manual page 18

To change the reference weight or quantity:
1. Press MENU.
2. When "Applications" is highlighted, press the
3. Press the key until "Count Mode" is highlighted and press the
.
4. Press the or
selected. Options are 5, 10, 20, 50, or 100 or custom.
5. Press the ENTER key to accept and begin counting mode.
To set custom reference quantity:
1. Press MENU.
2. When "Applications" is highlighted, press the
3. Press the key until "Count Mode" is highlighted and press the
.
4. Press the or
.
5. Using the or
Press to move to the next digit.
6. When the number is set, press ENTER to accept and begin count
mode.
To quit Count Mode, select "Normal Mode" in application
menu.
Note:
Memo:
key until the desired reference quantity is
key until "Custom" is highlighted, then press
key, set the first digit of the custom quantity.
14
.
.