Operation In Case Of Emergency - Parmco VERSO X9F Installation And Operating Instructions Manual

OPERATION IN CASE OF EMERGENCY

In the event of an emergency，you should:
Switch off all working units of the oven
●
Call the service center
●
Some minor faults can be fixed by referring to the instructions given in the table below. Before calling the
●
customer support center or the service center check the following points that are presented in the table.
PROBLEM
1.The appliance does not work
2.The programmer display is flashing
"0.00"
3. The oven lighting does not work.
REASON
Break in power supply
Choose wrong function
The appliance was disconnected from
the mains or there was a temporary
power cut.
The bulb is loose or damaged.
20
ACTON
Check the household fuse box; if there
is a blown fuse replace it with a new
one
Check if function knob. Temperature
knob is set to the correct position.
Set the current time(see use of the
programmer)
Tighten up or replace the blown
bulb(see cleaning and maintenance)