5.1.6.
System Security
Select "Basic Config" and "System Security" and then "System Security" to open the
screen shown in Figure 5-6. On this screen, you can configure the various settings
for accessing this switch for configuration and management.
Screen Description
IP Setup Interface
Displays the access settings for the IP address configuration software, bundled
Status
with the ZEQUO assist Plus and Panasonic network cameras. "Enable" is the fac-
tory default setting.* For instructions, refer to "6.2.Easy IP Address Setup Func-
tion".
Enabled
Disabled
Figure 5-6 System Security
Access is enabled.
Access is disabled.
37