Connecting The I-Stat Printer To A Downloader Or Downloader/Recharger; Printing Via A Downloader Or Downloader/Recharger; Printing Many Results - Abbott i-STAT 1 System Manual

CONNECTING THE i-STAT PRINTER TO A DOWNLOADER OR DOWN-
LOADER/RECHARGER
The Downloader Programming and Wiring section of the i-STAT 1 System Manual describes directions for

connecting the i-STAT Printer to a Downloader or Downloader/Recharger.

Note: the following two options ONLY can be used to connect the i-STAT Printer to a Downloader or
Downloader/Recharger:
Type of Downloader or Downloader/Recharg-
er Being Connected to the i-STAT Printer
Network Downloader or Downloader/Recharger
Serial Downloader or Downloader/Recharger

PRINTING VIA A DOWNLOADER OR DOWNLOADER/RECHARGER

1. Place i-STAT 1 handheld in a Downloader or Downloader/Recharger that is connected to the i-
STAT Printer.
2. Display the results to be printed on the handheld.
3. Press the
4. If printer is not powered from a wall outlet using the AC adapter, turn printer off.

PRINTING MANY RESULTS

1. Turn the i-STAT 1 handheld on.
2. Press the Menu key to bring up the Administration Menu.
3. Press 2 – Data Review.
4. Press 7 – List.
5. Scroll through the results using the ← and → keys.
6. Press the number key for the test record(s) to be printed. (Press the numbered key again to dese-
lect a record.)
7. Align i-STAT 1 handheld and i-STAT Printer IR window or place in the Downloader or Downloader/
Recharger attached to the i-STAT printer. Press the
8. Do not move handheld or printer until printing is complete.
9. If printer is not powered from a wall outlet using the AC adapter, turn printer off.
Art: 714369-00H
key on the handheld. Do not move handheld or printer until printing is complete.
Rev. Date: 03-Aug-12
Location of Connection Diagram in Down-
loader Programming and Wiring Section
Page 21-6 (Option 1)
Page 21-9 (Option 2)
key.
7 - 13