Restoring The Pc's Network Configuration - Abbott i-STAT 1 System Manual

17. If additional DRCs require configuration, connect the next DRC to the PC per step 2 and apply
power to the DRC and repeat steps 9 through 16. Otherwise, proceed to step 18.

RESTORING THE PC'S NETWORK CONFIGURATION:

18. Disconnect the Ethernet cable from the DRC and the PC. On the PC, click Start → Settings
→ Control Panel → Network and Internet Connections (if listed) → Network Connections.
19. Right-click on "Local Area Connection"
20. Select the "Internet Protocol (TCP/IP) connection and click the Properties button.
21. Restore Internet Protocol (TCP/IP) Properties in the General tab to the network settings recorded
in Step 6.
22. Click OK and close all Control Panel windows.
23. Connect the network cable from the PC to the network (wall).
24. To connect the configured DRC for transmissions to the Data Manager, following the instructions
in the Wiring the Downloader/Recharger sections below.
12
and select Properties.
Art: 728690-00D Rev. Date: 02-Aug-12