I-Stat Printer Paper; I-Stat Printer Power - Abbott i-STAT 1 System Manual

Hide thumbs Also See for i-STAT 1:

Table of Contents

i-STAT PRINTER PAPER

Printer paper may be ordered along with other supplies for the i-STAT System (Abbott List #

The STATUS indicator will illuminate to indicate the print status:

Out of Paper:

Paper for the i-STAT Printer can be installed or replaced as follows:

1. Open the paper compartment lid by pulling the release lever as shown in the printer il-

lustration on page 1 and remove any remaining paper.

2. Reel off a few centimeters of paper from the new paper roll, with the leading edge of the

paper feeding forward from the bottom of the roll.

3. Sit the new paper roll in the compartment such that the leading edge is resting outside

the compartment on the printer casing.

4. Close the lid until it snaps into place.

Note 1: Should the paper become creased or misaligned, simply reload the paper as described

above ensuring that the paper has a clean, straight edge.

Note 2: When removing a printout from the printer, pull the printout toward the front of the

printer and tear from one side to the other across the serrated edge.

There are three options for powering the i-STAT Printer:

Using the AC adapter and power cord only,

Using the Rechargeable Battery only, and

Using the Rechargeable Battery with the AC adapter and power cord.

Art: 714369-00H

Rev. Date: 03-Aug-12