Data Entry; Storage Of Results - Abbott i-STAT 1 System Manual

Data Entry

Data that can be scanned into the analyzer or entered via the keypad include:
See the Customization section in this manual for barcode formats recognized by
the analyzer.

Storage of Results

The analyzer automatically stores up to 1,000 test records. A test record consists of:
Quality Check Codes, which may appear during the test cycle indicating a problem
with the sample, calibration, sensors, mechanical or electrical functions of the analyzer,
are also stored.
The Analyzer Status option under the Administration Menu lists the number of stored
records as "Total" and "Unsent" records. Test records are stored as "Unsent" until
the analyzer uploads data to the Central Data Station at which time the records are
marked as sent. The analyzer can be customized to display a Memory Full prompt or
to disable testing until data is transmitted to the Central Data Station. Otherwise, the
oldest data is overwritten when the memory becomes full. Stored test records can be
reviewed through the Data Review option on the Administration Menu screen described
later in this section.
2-6
Operator ID

Patient ID, Proficiency ID, or Simulator ID

Cartridge Lot Number

Control Lot Number

Cal Ver Kit Lot Number

Comment codes for patient and control

results
Chart Page

Sample Type

Patient Temperature - The analyzer

will interpret numbers between 50.0
and 110.0 as degrees Fahrenheit
and between 10.0 and 45.0 as
degrees centigrade. When a patient
temperature is entered, blood gas
results will be displayed at both 37°C and the patient's temperature.
FIO2

Free Fields: three fields, up to 9 characters each

a set of results

the date and time the test was performed

the cartridge type

all information entered by barcode scanner or keypad including:

Operator and Patient IDs

Lot numbers for controls and cartridges

Chart page data

Serial number of the Electronic Simulator

the serial number of the analyzer

the number of times the analyzer has been used

the software and CLEW versions installed in the analyzer

the name of the analyzer's customization profile

Art: 714364-00M Rev. Date: 02-Aug-12