I-Stat Printer Specifications - Abbott i-STAT 1 System Manual

SPECIFICATIONS
Dimensions
Weight
Power
Communication Link
Paper
Buttons
LED Indicators
Printing Method
Printing Speed
Temperature
Printer Power Requirements
External Power Supply Unit (PSU)
Fuses
Note: This product has been tested to the requirements of CAN/CSA-C22.2 No. 61010-1, second edition,
including Amendment 1, or a later version of the same standard incorporating the same level of testing
requirements.
Art: 714369-00H
Height: 72.5mm
Width: 136mm
Depth: 120mm
500g (Approx.)
1. 4.8V NiMH rechargeable battery pack
2. Power adaptor for AC outlet
1. Infra-red
2. RJ12
5.7cm thermal
1. On/Off
2. Paper Feed
POWER: Green/Orange/Red
STATUS: Green/Orange/Red
Thermal line printing
Battery: Up to 10 lines per second
AC Adaptor: Up to 2.5 lines per second
Operating: 15ºC to 40ºC
Storage: -20ºC to 50ºC
The printer is rated at:
• 12Vdc
• 1.5A max
• 18W
The external PSU is rated at:
•
100-240Vac
• 50-60Hz
There are no operator replaceable fuses with
the i-STAT Printer.
Rev. Date: 03-Aug-12
7 - 7