Transmitting Data From Downloader To The Data Manager; Transmitting Data From Downloader/ Recharger To The Data Manager; Transmitted Information - Abbott i-STAT 1 System Manual

Transmitting Data
To transmit through a Downloader to the Data Manager, place the analyzer
from Downloader to
between the arms on the front of the Downloader with the test strip port end
the Data Manager
touching the Downloader. When properly aligned the red proximity light will
turn on and the analyzer will automatically transmit (upload) all unsent results.
(The analyzer does not need to be turned on.) Do not move the analyzer while
the message "Communication in Progress" is displayed on the screen.
Transmitting Data To transmit data through a Downloader/Recharger, place the analyzer in the
from Downloader
Downloader/Recharger's cradle. When properly aligned, the blue proximity
/ Recharger to the
light will turn on and the analyzer will automatically transmit (upload) all
Data Manager
unsent results. (The analyzer does not need to be turned on.) Do not move
the analyzer while the message "Communication in Progress" is displayed on
the screen.
Transmitted
The following information is transmitted from the analyzer with each test
Information
record:
6 - 4
 The date and time the test was performed
 Operator ID and Patient ID or Quality Test fluid lot
number
 All information entered by the operator, such as lot
numbers, sample type and comment codes
 Result(s)
 Serial number of the analyzer
 Uses count of the analyzer
 Application software version in the analyzer
 Standardization software in the analyzer
Art: 714368-00K Rev. Date: 02-Aug-12