Fuse; Disconnect The Ups Battery - Honeywell Thor VM1A User Manual

Fuse

The VM1A uses an 8A time delay (slow blow) fuse that is externally accessible and
user replaceable. The fuse is located on the back of the dock and is accessed by
unscrewing the cap.
Should the fuse need replacement, replace with similar type or rating of the below
fuse specs:
•
•
•
•
Caution: Fuse has voltage on it even when power is Off. Always disconnect input

Disconnect the UPS Battery

Caution: The UPS battery must be disconnected before you ship the Thor
Equipment Required
The following equipment is user-supplied:
•
•
Thor VM1A Vehicle-Mounted Computer
Standard Dock
Littelfuse 0215008.MXP,
Cooper Bussmann BK1/S506-8-R,
Bel Fuse 5HT 8-R,
or equivalent.
power before changing the fuse.
VM1A, Replace the UPS
Torque tool capable of measuring inch pounds
#2 Phillips screwdriver bit
Enhanced Dock
Battery, or Replace the Front Panel.
7