6.4.3
BATCH RESET COMMAND
Function
Resets the printer.
Format
[ESC] Z0 [LF] [NUL]
Explanation
• This command is not executed until the printer enters an idle state.
• Some values in the Parameter Set Command ([ESC] Z2;1) and the Fine Adjustment
Value Set Command ([ESC Z2;2]), will become effective when the printer is initialized.
This command should be sent after the Parameter Set Command ([ESC] Z2;1) or Fine
Adjustment Value Set Command ([ESC] Z2;2) is sent.
- 185 -
(zero)
[ESC] Z0