In The Case Of Data Matrix (Two-Dimensional Code) - Toshiba B-EV4 Series Manual

In the case of Data Matrix (Two-dimensional code)

Format [ESC] XBaa; bbbb, cccc, d, ee, ff, gg, h (, Ciiijjj) (, Jkkllmmmnnn) (= ooo ------ooo)
[LF] [NUL]
[ESC] XBaa; bbbb, cccc, d, ee, ff, gg, h (, Ciiijjj) (, Jkkllmmmnnn)
(= pp
Term aa:
bbbb:
cccc:
d:
ee:
ff:
gg:
h:
Ciiijjj:
, pp , pp , ------, pp ) [LF] [NUL]
1 2 3 20
Bar code number
00 to 31
Print origin of X-coordinate of the bar code
Fixed as 4 digits (in 0.1 mm units)
Print origin of Y-coordinate of the bar code
4 or 5 digits (in 0.1 mm units)
Type of bar code
Q: Data Matrix (Two-dimensional code)
ECC type
00 to 14: If value "00" to "14" is designated, barcode command is ignored.
20: ECC200
1-cell width
00 to 99 (in dots)
Format ID
No function (ignore)
Rotational angle of bar code
0: 0°
1: 90°
2: 180°
3: 270°
No. of cells
(Omissible. If omitted, it is automatically set.)
iii: No. of cells in X direction
jjj: No. of cells in Y direction
* Cell setting varies according to the ECC type.
No. of cells to be
designated
Min./Max. No. of cells
Rectangular code
• When this parameter is omitted, the number of cells is automatically
set. Also, when any data other than the above values is designated
for the number of cells in X and Y directions, the number of cells is
automatically set.
000 to 144
000 to 144
ECC200
Even numbers only
10 × 10 to 144 × 144
18 × 8
32 × 8
26 × 12
36 × 12
36 × 16
48 × 16
- 71 -