Eject Command - Toshiba B-EV4 Series Manual

6.3.16 EJECT COMMAND

Function Ejects (cuts) the label presently remaining between the head and the cutter and returns
to the original position.
Format [ESC] IB [LF] [NUL]
Notes When "with automatic forward feed standby" is selected by the parameter setting and if
no subsequent command from the PC is received within 3 second after ejection, the
printer automatically performs a 16.3-mm forward feed.
When the Eject Command is received in the forward feed standby state, the printer
feeds the label in reverse to the original position and ejects it.
* For notes, refer to the section regarding the Issue Command.
Examples
A
A
Cut position
A
A B
B C
B C
[ESC] C [LF] [NUL]
[ESC] PC001; 0200, 0125, 1, 1, A, 00, B [LF] [NUL]
[ESC] RC001; A [LF] [NUL]
[ESC] XS; I, 0001, 0001C3001 [LF] [NUL]
[ESC] RC001; B [LF] [NUL]
[ESC] XS; I, 0001, 0001C3001 [LF] [NUL]
[ESC] RC001; C [LF] [NUL]
[ESC] XS; I, 0001, 0001C3001 [LF] [NUL]
[ESC] IB [LF] [NUL]
Head position
(1) Idling
A (2) End of printing 1st label (A)
B
(3) End of printing 2nd label (B)
C (4) End of printing 3rd label (C)
(5) Feeds to the cut position by the
(6) End of cutting
(7) Since non-stop cut is performed,
(8) Feeds back to home position.
- 140 -
[ESC] IB
Eject Command
paper is fed over the cut position.