Link Field Data String; Bit Map Font Data Command - Toshiba B-EV4 Series Manual

6.3.10 BIT MAP FONT DATA COMMAND

Function Provides data for the bit map font row.
Format [ESC] RCaaa; bbb ------ bbb [LF] [NUL]
Link Field Data Command
[ESC] RC; ccc ------ ccc [LF] ddd ------ ddd [LF] ------ [LF] xxx ------ xxx [LF] [NUL]
Term aaa:
bbb ------ bbb: Data string to be printed
ccc ------ ccc:
ddd ------ ddd: Data string of link field No. 2
xxx ------ xxx:
Explanation (1)
Refer to Bit Map Font Format Command ([ESC] PC)
Character string number
000 to 199 (Two digits, 00 to 99, also acceptable.)
Max. 255 digits
(Max. 127 digits when the font type is 51, 52, 53, 54, or 55.)
Any excess data will be discarded.
For the character codes, refer to the character code table to be given
later in this specification.
Data string of link field No. 1
to
Data string of link field No. 99

Link field data string

• After the link field No. is designated in the Format Command, data strings are
linked using the Link Field Data Command to draw an image.
• Up to 255 digits of data strings can be linked. However, when the font type is
51, 52, 53, 54, or 55, only up to 127 digits can be linked.
When the number of digits exceeds the maximum value, excess data will be
discarded.
• Up to 99 data strings can be linked.
• Up to 2048 bytes can be used as the command length ([ESC] to [NUL]) of the
Link Field Data Command.
• When the data string is omitted in the Link Field Data Command, the following
process is performed:
No process will be performed for the field which contains no print data due
to the omission.
When the field partially loses print data due to the omission, the only
remaining data will be processed as print data.
• The Link Field Data Command can be used for the bit map font fields, outline
font fields, and bar code fields.
(The same result is obtained when any of the "RC," "RV" or "RB" command
code is designated.)
- 99 -
[ESC] RC