Table of Contents
Advertisement
3. ON LINE MODE
3. ON LINE MODE
3.1 Operation Panel
NOTE:
Use the [RESTART] key to
resume printing after a pause,
or after clearing an error.
This chapter describes usage of the keys on the Operation Panel in On
Line Mode.
When the printer is in On Line Mode and connected to a host computer,
the normal operation of printing images on labels can be achieved.
The figure below shows the Operation Panel and key functions..
LCD Message Display
POWER LED
(Green)
[RESTART] key
[FEED] key
The LCD Message Display shows messages to indicate the printer's
current status. Up to 16 characters can be displayed on this line.
There are three LED lights on the Operation Panel.
LED
Illuminates when...
POWER
The printer is turned on.
The printer is ready to
ON LINE
print.
ERROR
Any error occurs on the
printer.
There are three keys on the Operation Panel.
PAUSE
Used to stop printing temporarily.
RESTART
Used to restart printing.
FEED
Used to feed the media.
3- 1
POWER
ON LINE
ERROR
FEED
RESTART
PAUSE
Flashes when...
-----
The printer is
communicating with
your computer.
-----
EO1-33032
3.1 Operation Panel
ON LINE LED (Green)
ERROR LED (Red)
[PAUSE] key
Advertisement
Table of Contents
