Table of Contents
Advertisement
Wireless IAD User Manual
Source MAC Address & MAC Mask/ Destination MAC Address & MAC Mask：
Key in the specific MAC Address or MAC Mask of the devices which you
want the QoS rule to be applied to, or simply leave it blank to include all.
Protocol：
Choose a proper interface for this function. If you don't know how to select,
simply use the default one.
Source IP/ Subnet Mask/ Port：
Key in the source IP address (ex.: 192.168.1.0) and subnet mask (ex.:
255.255.255.0) for the application (ex.: FTP, HTTP, and so on) that you want
to invoke the QoS traffic rule. You may simply enter the source port, ranging
from 0 to 65535, as the traffic condition.
Destination IP/ Subnet Mask/ Port：
Enter the destination IP address (ex.: 168.95.1.88) and subnet mask
(ex.:255.255.255.0) for the application that you want to invoke the QoS traffic
rule. Or simply enter the destination port for the traffic condition; it ranges
from 1 to 65535.
90
Advertisement
Table of Contents
