Wireless IAD User Manual
IP Routing – Dynamic Routing
Routing Information Protocol (RIP) is utilized by means of exchanging
routing information between routers. It helps the routers to determine
optimal routes. This page allows you to enable/disable this function.
RIP Version:
It incorporates the RIP information when receiving and broadcasting the RIP
packets. From the drop down menu, select a RIP version to be accepted, 1, 2
or both.
Operation:
There are two modes for you to choose, Active and Passive. Select Active
for transmitting and receiving data, or select Passive for receiving data only.
Enabled:
Check Enabled to enable the RIP function on different interface. Otherwise,
disable this function.
Click Apply to invoke the settings set here.
68