Table of Contents
Advertisement
Example
Suppose we are going to record the system logs on both the ADSL Router
and the
Server bearing IP address
illustrate the situation:
1.
Choose Enabled Log.
2.
Select Debugging as the Log Level, and Error as the Display Level. (Or
select other level according to your needs.)
3.
Set the Mode as Both, key in the Server IP Address as 10.11.95.2, and
leave the Server UDP Port as the default value 514.
4.
Press Apply to invoke the settings.
Wireless IAD User Manual
10.11.95.2, the procedures below
127
Advertisement
Table of Contents
