Table of Contents
Advertisement
Bridge Mode
FAN
FAILUR
FAN
S OK
E
ISP
(Internet Service Provider)
BRAS
AAA
RDAIUS
Server
*BRAS: Broadband
Remote Access Server
Description︰
In this example, the Wireless IAD acts as a bridge which bridging the PC IP
addresses from LAN to WAN. The PC IP address can be a static public
address that is pre-assigned by the ISP or a dynamic public address that is
assigned by the ISP DHCP server, or an IP address received from PPPoE
software.
Therefore, it does not require a public IP address. It only has a default
private IP address (192.168.1.1) for management purpose.
Configuration︰
1.
Choose a client PC and set the IP as 192.168.1.x (x is between 2 and 254)
and the gateway as 192.168.1.1.
2.
Start your browser and type 192.168.1.1 in the URL box to access ADSL
web-based manager.
Go to Quick Start – Quick Setup. Uncheck Auto Scan Internet
3.
Connection (PVC). Key in the VCI and VPI value, e.g.,
VPI – 0
VCI – 35
Then click the Next button.
On the Configure Internet Connection – Connection Type page, select
4.
Bridging then click the Next button.
5.
On the WAN IP Settings page, select none for WAN IP address settings.
MULTI
CAUTIO
FAILUR
FAN
-
When swapping this
E
fan tray,
removal and
N
replacement must
be done under two
system shutdown will
minutes or
be occur.
OA PROCESSER
OB
ONLY
SLO
SUB
T 0
STM-1
SLO
SUB
T 1
PROCESSER
ONLY
DSLAM
Bridge Mode
Wireless IAD User Manual
Public IP
assigned
by BRAS
Loop
Wireless IAD
Default
Private IP
192.168.1.1
PPPoE
Client S/W
PC(S)
41
Advertisement
Table of Contents
