Table of Contents
Advertisement
Wireless IAD User Manual
WAN 802.1p:
If 802.1p is enabled on Internet connection, WAN 802.1p value of the
upstream packets can be overwritten by the selected value. You may select
a priority from the drop-down menu.
If you set the LAN 802.1p Priority 0 as the traffic condition, choose Low
traffic priority for this rule, set DSCP as BE, and WAN 802.1p as no change,
after clicking Apply, you will get the result as the figure in the right column.
Thus when the users' data matches the traffic condition, the transmission
will get a low traffic priority.
You may check the Delete box and press Delete to discard it, or click Add to
create more.
88
Advertisement
Table of Contents
