Chapter 3 : Accessing The Internet - NetVito RTV1835W-D90 User Manual

Chapter 3 : Accessing the Internet

Before configuring the Wireless IAD, you must decide whether to configure
the Wireless IAD as a bridge or as a router. This chapter presents some
deployment examples for your reference. Each mode includes its general
configure procedures.
configuration, refer to "Web Configuration".
To ensure your PC accessing the Internet successfully, please check the
following first.
When all above preparations are ready, you can open the Browser and type
"192.168.1.1" into the URL box and start to make the web configuration for
different connection modes.
This chapter is going to introduce the function of each connection mode
and the basic configuring steps that you have to do. If you do not follow the
configuring steps for using these connection modes, you might get some
connection problems and cannot connect to the Internet well.
For more detailed
PPP over ATM (PPPoA)
PPP over Ethernet (PPPoE)
Numbered IP over ATM (IPoA)
Numbered IP over ATM (IPoA) + NAT
Unnumbered IP over ATM (IPoA)
Unnumbered IP over ATM (IPoA) + NAT
Bridge Mode
MER (Bridge Mode + NAT)
A network interface card is installed on your PC.
The Wireless IAD is solidly connected with your computer.
The TCP/IP protocol has been installed and the IP address
setting is to obtain IP address automatically.
Wireless IAD User Manual
information about web
26