Wireless IAD User Manual
Adding a New One:
To add a static route, please click Add. Type the destination network
address, subnet mask and gateway that you received from the ISP and click
Apply.
For example, type 192.168.1.1 in the field of the gateway IP address and
leave the destination network blank.
Destination IP Address:
The destination IP address of the network indicates where data packets are
to be sent. You may specify an IP, type 0.0.0.0, or leave it blank.
Netmask:
Enter the Netmask that you got from the ISP, type 0.0.0.0, or leave it blank.
Gateway IP Address:
Check it to forward packets to the specific gateway. Enter the gateway IP
address that you want to use.
65