Table of Contents
Advertisement
Wireless IAD User Manual
Configure the second IP Address and Subnet Mask:
Check this box to enter another set of IP Address and Subnet Mask to
connect to your IAD if they are not included in the range that DHCP
server accepts. After checking this box, the secondary IP address and
subnet mask entries will show up, as shown in the right figure.
Secondary IP Address & Subnet Mask:
Enter the information provided
by your ISP for your LAN connection.
MTU:
It means the maximum size of the packet that transmitted in the network.
The packet of the data greater than the number set here will be divided
into several packets for transmitting. Type the value into the field of
MTU. The default setting is 1500.
Apply:
Click this button to activate the settings listed above.
52
Advertisement
Table of Contents
