Wireless IAD User Manual
Bitswap:
It is a mandatory receiver initiated feature to maintain the operating
conditions of the modem during changing environment conditions. It
reallocates the data bits and power among the allowed carriers without
modification of the higher layer control parameters in the ATU. After a bit
swapping reconfiguration, the total data rate and the data rate on each
latency path is unchanged. Check this box to enable the function. If not,
uncheck this box to close the function
Seamless Rate Adaptation(SRA):
It enables the ADSL2/ ADSL2+ Router to change the data rate of the
connection while in operation without any service interruption or bit errors.
Check this box to enable the function. If not, uncheck this box to close the
function.
63