Wireless IAD User Manual
Accesses Control
The web page allows you to enable the wireless MAC control configuration.
Access Control:
Click Off to disable this function. Click On in Allow mode to allow the
devices using matched MAC address to link to the AP. And click On in Deny
mode to disturb the listed wireless MAC address to access the AP.
View Access Control List:
Click this button to view the wireless access control list and to add a new
MAC address.
The Wireless Access Control List dialog allows you to add a new MAC
address and view current MAC addresses that you had added.
To add a new MAC address to your wireless MAC address filter, click on the
Add button
MAC Address of Wireless adaptor:
Key in the MAC Address to be filtered. And click Apply.
109