Table of Contents
Advertisement
Chapter 2 : System Requirement and Installation
System Requirement
To access the Wireless IAD via Ethernet, the host computer must meet the
following requirements:
Equipped with an Ethernet network interface.
Have TCP/IP installed.
Allow the client PC to obtain an IP address automatically or set a fixed IP
address.
With a web browser installed: Internet Explorer 5.x or later.
The Wireless IAD is configured with the default IP address of 192.168.1.1
and subnet mask of 255.255.255.0. Considering that the DHCP server is
enabled by default, the DHCP clients should be able to access the Wireless
IAD, or the host PC should be assigned an IP address first for initial
configuration.
You also can manage the Wireless IAD through a web browser-based
manager:
ADSL ROUTER CONTROL
uses the HTTP protocol via a web browser to allow you to set up and
manage the device.
Choosing a place for the Wireless IAD
Place the Wireless IAD close to ADSL wall outlet and power outlet for the
cable to reach it easily.
Avoid placing the device in places where people may walk on the cables.
Also keep it away from direct sunlight or heat sources.
Place the device on a flat and stable stand.
Wireless IAD User Manual
PANEL. The Wireless IAD manager
15
Advertisement
Table of Contents
