Table of Contents
Advertisement
Wireless IAD User Manual
IP Address seen by Internet Users：
Once configured, anyone on the Internet can connect to your Virtual
Servers.
Please note that, in the above picture, both Internet users are connecting to
the
same
IP
address,
but
using
different
protocols,
such
as
Http://203.70.212.52 and Ftp://203.70.212.52.
To Internet users, all virtual servers on your LAN have the same IP Address.
This IP Address is allocated by your ISP. This address should be static,
rather than dynamic, to make it easier for Internet users to connect to your
Servers. However, you can use Dynamic DNS feature to allow users to
connect to your virtual servers by using a URL, instead of an IP address.
IP addresses can be automatically redirected to local servers configured
with private IP addresses. In other words, depending on the requested
service (TCP/UDP port number), the router redirects the external service
request to the appropriate server (located at another internal IP address).
Add New Port Forwarding：
To set a virtual server, please open the Virtual Server item from the
Advanced setup menu.
To add a new Port Forwarding, please click Add from the Port Forwarding
web page.
70
Advertisement
Table of Contents
