Table of Contents
Advertisement
6.
On the Configure LAN side Settings page, key in the IP address and
subnet mask for your LAN. Check DHCP Server On box, and enter the
start and end points, e.g.:
Primary IP address:192.168.1.1
Subnet Mask:255.255.255.0
Start IP Address:192.168.1.2
End IP Address: 192.168.1.254
Then key in the leased time that you want. And click Next
7.
Check the network information on the Summary page. Make sure the
contents match the settings provided by your ISP. Click Finish.
8.
Now the IAD is well-configured. You can access the Internet.
Wireless IAD User Manual
28
Advertisement
Table of Contents
