Wireless IAD User Manual
Identify the Validation of Certificate from ACS
When using SSL protocol to connect to ACS, a trusted CA and synchronic
time setting with the server are used to identify the validation of the
Certificate sent from ACS.
When choosing with SSL for Connect to ACS, you will see a paragraph
appear on the bottom of the window (as shown in the right column).
Press Import Certificate to Import Certificate obtained from your ISP, a
window (as shown in the figure) will be prompted for you to import
certificate.
Note:
The certificate may have been imported in this device already, please check
with your ISP.
To synchronize your time with the server, go to Management->Internet Time
to adjust the setting. Configure to set time by Time Server, and make sure
the time zone is the same as the server's.
(Please refer to the next section for detailed information about Internet
Time.)
122