Table of Contents
Advertisement
Primary DNS server: 168.95.1.1
Secondary DNS server: 168.95.192.1
Uncheck Enable NAT and click Next.
On the Configure LAN side Settings page, key in the information for
(5).
your LAN, e.g.,
Primary IP Address: 192.168.1.1
Subnet mask: 255.255.255.0
Start IP Address: 192.168.1.2
End IP Address: 192.168.1.254
Check Configure the second IP Address and Subnet Mask for LAN
(6).
Interface and enter the information needed, e.g.,
Secondary IP Address: 10.3.80.81
Subnet mask: 255.255.255.248
Check DHCP Server Off and click Next.
Check the network information on the Summary page. Make sure the
(7).
settings match the settings provided by your ISP. Click Finish.
Refer to the TCP/IP properties, specify an IP Address, and fill in other
(8).
information needed, e.g.:
IP Address: 10.3.80.82
Subnet Mask: 255.255.255.248
Gateway: 10.3.80.81
Preferred DNS server: 168.95.1.1
Now the IAD is well-configured. You can access the Internet.
(9).
Wireless IAD User Manual
38
Advertisement
Table of Contents
